HOMEGALLERYAREAS WE SERVECONTACT US/CONFIGURATIONSPATTERN GLASS SAMPLESHARDWAREHARDWARE FINISHESABOUT OUR HINGESABOUT YOUR DAMABOUT OUR NOTCHINGABOUT OUR SILICONEBEFORE AND AFTER PICSSHOWER CLEANING TIPSWARRANTY INFORMATIONQ&ASITE MAP

The pitch of the dam should always be towards the inside of the shower stall. 1/8" is  perfect. Too much of a pitch can result in larger gap under the door. We use polycarbonate sweeps on the bottom of the shower door for added water damming.
New_pics_8_13/Dam_pitches_good.jpg

On flat dams, a threshold can be installed. We in most cases do not use thresholds even if the dam is flat. 

New_pics_8_13/FLATDAMTHRESHOLD2.jpg
The pitch of the dam should never be to the outside of the shower stall. The water will hit the dam and run out onto the outside of the shower stall. If you have a flat dam we can put a threshold on the dam. In most cases it wont leak but, it can.
New_pics_8_13/Dam_pitches_bad.jpg



T&W Shower Doors
Serving the Inland Empire and Orange county 3/8" & 1/2" Seamless shower doors